Author Topic: New Valve bodies from CRT  (Read 2091 times)

0 Members and 1 Guest are viewing this topic.

Offline CRT

  • I Feel the Bern!!!!
  • Moderator
  • Just got my first Turbo
  • *****
  • Posts: 6791
New Valve bodies from CRT
« on: April 11, 2016, 03:42:06 PM »
New for 2016 is our line of CRT billet pro tree trans brake valve bodies that out flow stock cast valve bodies and out performs the competition in every way. Our pro tree billet trans brake is super fast off the line, and locks up with zero creep or rockn. Comes with low band apply, set at 180 psi. Available is 1st gear and or 2nd gear trans brake launch, and clean neutral.

We will always have a full inventory of valve bodies with no waiting, no "it will be three more weeks" excuses from CRT. We always answer our tech calls, and ordering is easy with our on line shopping cart that is open 24 hours. We want to give you the best trans brake with the best customer service, and the best technical advice, so you can be your best at the race track. We are very good at what we do, cause we like what we do and enjoy every day at the shop.

Offline LucastheCane

  • Just got my .509 Cam
  • *
  • Posts: 49
Re: New Valve bodies from CRT
« Reply #1 on: April 12, 2016, 12:35:00 PM »
Looks good John   8)

Offline CRT

  • I Feel the Bern!!!!
  • Moderator
  • Just got my first Turbo
  • *****
  • Posts: 6791
Re: New Valve bodies from CRT
« Reply #2 on: April 12, 2016, 01:54:02 PM »
Thanks, they are off to a good start. selling good

Offline NancyAbona

  • Just got my .509 Cam
  • *
  • Posts: 5
  • Gender: Male
New Valve bodies from CRT
« Reply #3 on: October 15, 2019, 09:53:26 PM »
The cams have the lobe. Just pull off the block off plate. And install push rod and other parts from your 87 for fuel pump

Offline Sariadrump

  • Just got my .509 Cam
  • *
  • Posts: 8
  • Gender: Male
    • Great news
New Valve bodies from CRT
« Reply #4 on: October 15, 2019, 11:30:40 PM »
thanks for the info guys when i undo the top 2 bolts is it easyer from the bottom cuase i crawled under there today and it looks like they are a big pain to get out. thanks again

Offline Alisongar

  • Just got my .509 Cam
  • *
  • Posts: 9
  • Gender: Male
New Valve bodies from CRT
« Reply #5 on: October 20, 2019, 07:20:16 PM »
Looks like they are not selling there anymore.

I went to my saved sellers list and they have no items listed.

99.8 positive feedback so its not a CS issue.

Offline Mabelcidly

  • Just got my .509 Cam
  • *
  • Posts: 2
  • Gender: Male
New Valve bodies from CRT
« Reply #6 on: November 21, 2019, 09:23:50 PM »
the timing is way off for sure among other things i am sure.
i am in Toronto west end...at the bottom of the 400.
my mind has been reeling all weekend ..what a total piss-off.

Offline Christainere

  • Just got my .509 Cam
  • *
  • Posts: 3
  • Gender: Male
New Valve bodies from CRT
« Reply #7 on: November 22, 2019, 06:40:34 AM »
make sure you use the flywheel from the l98 or your newer 305, the older car has a 2 piece rear main, and the l98 woudl have a 1 piece rear main.  Also, i am not sure if the l98 camshaft has a fuel pump lobe on it, the bastard should be able to answer that.

Offline AlisonOdosy

  • Just got my .509 Cam
  • *
  • Posts: 1
  • Gender: Male
New Valve bodies from CRT
« Reply #8 on: December 12, 2019, 01:55:58 PM »
sounds like that is completely do-able. Cant wait to get at it. If all goes well this winter, I will showing up at the shows with two cars...just have to wait and see...

Offline VerdaBed

  • Just got my .509 Cam
  • *
  • Posts: 1
  • Gender: Male
New Valve bodies from CRT
« Reply #9 on: December 13, 2019, 08:35:21 PM »
Ya, I will strip the engine down to just block and heads, then pull it out. Then drop the tranny. It has to go for inspection. For some reason 6th gear disappeared. Shifter goes into the gate but nothing there. Always something man.....